A very fast caching engine for WordPress that produces static html files.
|Author:||Automattic (profile at wordpress.org)|
|WordPress version required:||3.0|
|WordPress version tested:||4.7.2|
|Added to WordPress repository:||05-11-2007|
|Total downloads:||11 913 482|
|Active installs:||1 000 000+|
Click to start download
How do I know my blog is being cached?
Go to Settings->WP Super Cache and look for the "Cache Tester" form on the easy settings page. Click "Test Cache" and the plugin will request the front page of the site twice, comparing a timestamp on each to make sure they match.
If you want to do it manually, enable debugging in the plugin settings page and load the log file in a new browser tab. Then view your blog while logged in and logged out. You should see activity in the log. View the source of any page on your site. When a page is first created, you'll see the text "Dynamic page generated in XXXX seconds." and "Cached page generated by WP-Super-Cache on YYYY-MM-DD HH:MM:SS" at the end of the source code. On reload, a cached page will show the same timestamp so wait a few seconds before checking. In legacy caching mode, if you have compression enabled, the text "Compression = gzip" will be added. If compression is disabled and the page is served as a static html file, the text "super cache" will be added. The only other way to check if your cached file was served by PHP script or from the static cache is by looking at the HTTP headers. PHP cached pages will have the header "WP-Super-Cache: Served supercache file from PHP". Legacy cached files will have the header, "WP-Super-Cache: Served legacy cache file". I used the Live HTTP Headers extension for Firefox to examine the headers. You should also check your cache directory in wp-content/cache/supercache/hostname/ for static cache files. If the plugin rules are missing from your .htaccess file, the plugin will attempt to serve the super cached page if it's found. The header "WP-Super-Cache: Served supercache file from PHP" if this happens.
Legacy (WP-Cache) vs Supercache files
WP-Cache files are stored in wp-content/cache/ (or on MU sites in a blogs sub directory) and are named wp-cache-XXXXXXXXXXXXXXXXX.html. Associated meta files are stored in a meta sub directory. Those files contain information about the cached file. These files are generated by the "legacy caching" code in the plugin. Supercache files are stored in wp-content/cache/supercache/HOSTNAME/ where HOSTNAME is your domain name. The files are stored in directories matching your site's permalink structure.
Will comments and other dynamic parts of my blog update immediately?
Will the Super Cache compression slow down my server?
No, it will do the opposite. Super Cache files are compressed and stored that way so the heavy compression is done only once. These files are generally much smaller and are sent to a visitor's browser much more quickly than uncompressed html. As a result, your server spends less time talking over the network which saves CPU time and bandwidth, and can also serve the next request much more quickly.
How do I make certain parts of the page stay dynamic?
Note: this functionality is disabled by default. You will have to enable it on the Advanced Settings page.
WP Super Cache 1.4 introduced a cacheaction filter called wpsc_cachedata. The cached page to be displayed goes through this filter and allows modification of the page. If the page contains a placeholder tag the filter can be used to replace that tag with your dynamically generated html. The function that hooks on to the wpsc_cachedata filter should be put in a file in the WP Super Cache plugins folder unless you use the late_init feature. An example plugin is included. Edit dynamic-cache-test.php to see the example code. There are two example functions there. There's a simple function that replaces a string (or tag) you define when the cached page is served. The other example function uses an output buffer to generate the dynamic content. Due to a limitation in how PHP works the output buffer code MUST run before the wpsc_cachedata filter is hit, at least for when a page is cached. It doesn't matter when serving cached pages. See this post for a more technical and longer explanation. To execute WordPress functions you must enable the 'Late init' feature on the advanced settings page.
How do I use WordPress functions in cached dynamic pages?
How do I delay serving the cache until the "init" action fires?
Cached files are served before almost all of WordPress is loaded. While that's great for performance it's a pain when you want to extend the plugin using a core part of WordPress. Enable 'Late init' mode on the Advanced settings page and cached files will be served when "init" fires. WordPress and it's plugins will be loaded now.
Why don't WP UserOnline, Popularity Contest, WP Postratings or plugin X not work or update on my blog now?
Why do my WP Super Cache plugin disappear when I upgrade the plugin?
WordPress deletes the plugin folder when it updates a plugin. This is the same with WP Super Cache so any modified files in wp-super-cache/plugins/ will be deleted. You can define the variable $wp_cache_plugins_dir in wp-config.php or wp-content/wp-cache-config.php and point it at a directory outside of the wp-super-cache folder. The plugin will look there for it's plugins.
What does the Cache Rebuild feature do?
When a visitor leaves a comment the cached file for that page is deleted and the next visitor recreates the cached page. A page takes time to load so what happens if it receives 100 visitors during this time? There won't be a cached page so WordPress will serve a fresh page for each user and the plugin will try to create a cached page for each of those 100 visitors causing a huge load on your server. This feature stops this happening. The cached page is not cleared when a comment is left. It is marked for rebuilding instead. The next visitor within the next 10 seconds will regenerate the cached page while the old page is served to the other 99 visitors. The page is eventually loaded by the first visitor and the cached page updated. See this post for more.
Why doesn't the plugin cache requests by search engine bots by default?
Those bots usually only visit each page once and if the page is not popular there's no point creating a cache file that will sit idle on your server. However if you're not using legacy caching you can allow these visits to be cached by removing the list of bots from "Rejected User Agents" on the Advanced settings page.
A category page is showing instead of my homepage
A tiny proportion of websites will have problems with the following configuration:
- Uses a static page for the front page.
- Uses /%category%/%postname%/ permalink structure.
Sometimes a category page is cached as the homepage of the site instead of the static page. I can't replicate the problem but a simple solution is to switch the plugin to PHP mode. For normal traffic you will see no difference in the speed of your site. You can also enable "Extra homepage checks" on the Advanced Settings page.
Why do I get warnings about caching from http://ismyblogworking.com/
"Your blog doesn't support client caching (no 304 response to If-modified-since)." "Your feed doesn't support caching (no 304 response to If-modified-since)"
Supercache doesn't support 304 header checks in mod_rewrite mode but does support it in PHP mode. This is caching done by your browser, not the server. It is a check your browser does to ask the server if an updated version of the current page is available. If not, it doesn't download the old version again. The page is still cached by your server, just not by your visitors' browsers. Try the Cacheability Engine at http://www.ircache.net/cgi-bin/cacheability.py or http://redbot.org/ for further analysis.
How should I best use the utm_source tracking tools in Google Analytics with this plugin?
That tracking adds a query string to each url linked from various sources like Twitter and feedreaders. Unfortunately it stops pages being supercached. See Joost's comment here for how to turn it into an anchor tag which can be supercached.
The plugin complains that wp-content is writable! htdocs is writable!
It's not good when the web server can write to these directories but sometimes shared hosting accounts are set up in this way to make administration easier. Use
chmod 755 directory to fix the permissions or find the permissions section of your ftp client. This Google search will lead you to more information on this topic and there's also this codex page too. Unfortunately some hosts require that those directories be writable. If that's the case just ignore this warning.
How do I delete the WP_CACHE define from wp-config.php?
Load your desktop ftp client and connect to your site. Navigate to the root (or the directory below it) of your site where you'll find wp-config.php. Download that file and edit it in a text editor. Delete the line
define( 'WP_CACHE', true ); and save the file. Now upload it, overwriting the wp-config.php on your server.
How do I delete the Super Cache rules from the .htaccess file?
Load your desktop ftp client and connect to your site. You may need to enable "Show hidden files" in the preferences of the ftp client. Navigate to the root of your site where you'll find the .htaccess file. Download that file and edit it in a text editor. Delete the lines between "# BEGIN WPSuperCache" and "# END WPSuperCache" and save the file. Now upload it, overwriting the .htaccess file on your server.
How do I change file permissions?
This page on the WordPress Codex explains everything you need to know about file permissions on your server and various ways of changing them.
Why do I get load spikes when new posts are made?
You may have the "clear all cached files when new posts are made" option set. Clearing those files can take time plus your visitors will now be visiting uncached pages. Are you using Google Analytics campaign tracking with utm_source in the url? Those pages aren't cached. See the question, "How should I best use the utm_source tracking tools in Google Analytics with this plugin" above for how to use them properly. Cached pages have to be refreshed when posts are made. Perhaps your server just isn't up to the job of serving the amount of traffic you get. Enable the "cache rebuild" feature as that may help.
How many pages can I cache?
The only real limit are limits defined by your server. For example, EXT2 and EXT3 allow a maximum of 31,999 sub directories so if you have a flat permalink structure (like /%POSTNAME%/) and more than 32,000 posts you may run into problems. Likewise, if you run a multisite network and have more than 31,999 sites (blogs) you won't be able to cache all of them. Realistically if you had that many active sites you wouldn't be running on one server.
How do I serve cached mobile pages to clients on small screens like phones and tablets?
You'll have to use a separate mobile plugin to render a page formatted for those visitors. The following plugins have been tested but YMMV depending on mobile client.
- Jetpack's Mobile Theme Module
- WordPress Mobile Edition
- WordPress Mobile Pack (can't have "Don't cache pages for known users." enabled)
If things don't work when you installed the plugin here are a few things to check:
- Is wp-content writable by the web server?
- Is there a wp-content/wp-cache-config.php ? If not, copy the file wp-super-cache/wp-cache-config-sample.php to wp-content/wp-cache-config.php and make sure WPCACHEHOME points at the right place.
- Is there a wp-content/advanced-cache.php ? If not, then you must copy wp-super-cache/advanced-cache.php into wp-content/. You must edit the file and change the path so it points at the wp-super-cache folder.
- If pages are not cached at all, remove wp-content/advanced-cache.php and recreate it, following the advice above.
Make sure the following line is in wp-config.php and it is ABOVE the "require_once(ABSPATH.'wp-settings.php');" line:
define( 'WP_CACHE', true );
- Try the Settings->WP Super Cache page again and enable cache.
- Look in wp-content/cache/supercache/. Are there directories and files there?
- Anything in your php error_log?
- If your browser keeps asking you to save the file after the super cache is installed you must disable Super Cache compression. Go to the Settings->WP Super Cache page and disable it there.
- The plugin does not work very well when PHP's safe mode is active. This must be disabled by your administrator.
- If pages are randomly super cached and sometimes not, your blog can probably be viewed with and without the "www" prefix on the URL. You should choose one way and install the Enforce www preference plugin if you are using an old WordPress install. The latest versions redirect themselves (you should always be running the latest version of WordPress anyway!)
- Private Server users at Dreamhost should edit wp-content/wp-cache-config.php and set the cache dir to "/tmp/" if they are getting errors about increasing CPU usage. See this discussion for more.
- File locking errors such as "failed to acquire key 0x152b: Permission denied in..." or "Page not cached by WP Super Cache. Could not get mutex lock." are a sign that you may have to use file locking. Edit wp-content/wp-cache-config.php and uncomment "$use_flock = true" or set $sem_id to a different value. You can also disable file locking from the Admin screen as a last resort.
- Make sure cache/wp_cache_mutex.lock is writable by the web server if using coarse file locking.
- The cache folder cannot be put on an NFS or Samba or NAS share. It has to be on a local disk. File locking and deleting expired files will not work properly unless the cache folder is on the local machine.
Garbage collection of old cache files won't work if WordPress can't find wp-cron.php. If your hostname resolves to 127.0.0.1 it could be preventing the garbage collection from working. Check your access_logs for wp-cron.php entries. Do they return a 404 (file not found) or 200 code? If it's 404 or you don't see wp-cron.php anywhere WordPress may be looking for that script in the wrong place. You should speak to your server administator to correct this or edit /etc/hosts on Unix servers and remove the following line. Your hostname must resolve to the external IP address other servers on the network/Internet use. See http://yoast.com/wp-cron-issues/ for more. A line like "127.0.0.1 localhost localhost.localdomain" is ok.
- If old pages are being served to your visitors via the supercache, you may be missing Apache modules (or their equivalents if you don't use Apache). 3 modules are required: mod_mime, mod_headers and mod_expires. The last two are especially important for making sure browsers load new versions of existing pages on your site.
- The error message, "WP Super Cache is installed but broken. The path to wp-cache-phase1.php in wp-content/advanced-cache.php must be fixed!" appears at the end of every page. Open the file wp-content/advanced-cache.php in your favourite editor. Is the path to wp-cache-phase1.php correct? This file will normally be in wp-content/plugins/wp-super-cache/. If it is not correct the caching engine will not load.
- Caching doesn't work. The timestamp on my blog keeps changing when I reload. Check that the path in your .htaccess rules matches where the supercache directory is. You may have to hardcode it. Or use the plugin in PHP or legacy caching mode.
If supercache cache files are generated but not served, check the permissions on all your wp-content/cache/supercache folders (and each of wp-content cache and supercache folders) and wp-content/cache/.htaccess. If your PHP runs as a different user to Apache and permissions are strict Apache may not be able to read the PHP generated cache files. To fix you must add the following line to your wp-config.php (Add it above the WP_CACHE define.) Then clear your cache.
umask( 0022 );
If you see garbage in your browser after enabling compression in the plugin, compression may already be enabled in your web server. In Apache you must disable mod_deflate, or in PHP zlib compression may be enabled. You can disable that in three ways. If you have root access, edit your php.ini and find the zlib.output_compression setting and make sure it's "Off" or add this line to your .htaccess:
php_flag zlib.output_compression offIf that doesn't work, add this line to your wp-config.php:
- The "white screen of death" or a blank page when you visit your site is almost always caused by a PHP error but it may also be caused by APC. Disable that PHP extension if you have trouble and replace with eAccelerator or Xcache.
- After uninstalling, your permalinks may break if you remove the WordPress mod_rewrite rules too. Regenerate those rules by visiting the Settings->Permalink page and saving that form again.
- If your blog refuses to load make sure your wp-config.php is correct. Are you missing an opening or closing PHP tag?
- Your front page is ok but posts and pages give a 404? Go to Settings->permalinks and click "Save" once you've selected a custom permalink structure. You may need to manually update your .htaccess file.
If certain characters do not appear correctly on your website your server may not be configured correctly. You need to tell visitors what character set is used. Go to Settings->Reading and copy the 'Encoding for pages and feeds' value. Edit the .htaccess file with all your Supercache and WordPress rewrite rules and add this at the top, replacing CHARSET with the copied value. (for example, 'UTF-8')
- Use Cron View to help diagnose garbage collection and preload problems. Use the plugin to make sure jobs are scheduled and for what time. Look for the wp_cache_gc and wp_cache_full_preload_hook jobs.
- The error message, "WP Super Cache is installed but broken. The constant WPCACHEHOME must be set in the file wp-config.php and point at the WP Super Cache plugin directory." appears at the end of every page. You can delete wp-content/advanced-cache.php and reload the plugin settings page or edit wp-config.php and look for WPCACHEHOME and make sure it points at the wp-super-cache folder. This will normally be wp-content/plugins/wp-super-cache/ but you'll likely need the full path to that file (so it's easier to let the settings page fix it). If it is not correct the caching engine will not load.
- If your server is running into trouble because of the number of semaphores used by the plugin it's because your users are using file locking which is not recommended (but is needed by a small number of users). You can globally disable file locking by defining the constant WPSC_DISABLE_LOCKING, or defining the constant WPSC_REMOVE_SEMAPHORE so that sem_remove() is called after every page is cached but that seems to cause problems for other processes requesting the same semaphore. Best to disable it.
- Fixed bug when not running sem_remove after sem_release. See https://github.com/Automattic/wp-super-cache/issues/85
- Fixed a PHP error impacting PHP 7.1.
- Fixed a bug where we cached PUT and DELETE requests. We're treating them like POST requests now.
- Delete supercache cache files, even when supercache is disabled, because mod_rewrite rules might still be active.
- Updated the settings page, moving things around. #173
- Make file locking less attractive on the settings page and fixed the WPSC_DISABLE_LOCKING constant so it really disables file locking even if the user has enabled it already.
- Added a WPSC_REMOVE_SEMAPHORE constant that must be defined if sem_remove() is to be used as it may cause problems. #174
- Added a "wpsc_delete_related_pages_on_edit" filter that on returning 0 will disable deletion of pages outside of page being edited. #175
- Fixed plugin deleting all cached pages when a site had a static homepage. #175
- Make sure $cache_path has a trailing slash #177
- Remove flush() #127 but also check if headers are empty and flush and get headers again. #179
- Add fix for customizer #161 and don't cache PUT AND DELETE requests #178
- Check for superglobals before using them. #131
- Removed malware URL in a code comment. (harmless to operation of plugin but gets flagged by A/V software)
- Updated translation file.
- Update the settings page for WordPress 4.4. layout changes.
- Generate the file cache/.htaccess even when one exists so gzip rules are created and gzipped pages are served correctly. Props Tigertech. https://wordpress.org/support/topic/all-website-pages-downloading-gz-file-after-latest-update?replies=36#post-7494087
- Enhancement: Only preload public post types. Props webaware.
- Added an uninstall function that deletes the config file. Deactivate function doesn't delete it any more.
- Possible to deactivate the plugin without visiting the settings page now.
- Fixed the cache rebuild system. Rebuild files now survive longer than the request that generate them.
- Minor optimisations: prune_super_cache() exits immediately if the file doesn't exist. The output of wp_cache_get_cookies_values() is now cached.
- Added PHP pid to the debug log to aid debugging.
- Various small bug fixes.
- Fixed reset of expiry time and GC settings when updating advanced settings.
- Removed CacheMeta class to avoid APC errors. It's not used any more.
- Fixed reset of advanced settings when using "easy" settings page.
- Fixed XSS in settings page.
- Hide cache files when servers display directory indexes.
- Prevent PHP object injection through use of serialize().
- Fixed fatal error in output handler if GET parameters present in query. Props webaware.
- Fixed debug log. It wasn't logging the right message.
- Security release fixing an XSS bug in the settings page. Props Marc Montpas from Sucuri.
- Added wp_debug_log(). Props Jen Heilemann.
- Minor fixes.
- Fixed "acceptable file list".
- Fixed "Don't cache GET requests" feature.
- Maybe fixed "304 not modified" problem for some users.
- Fixed some PHP warnings.
- Fixed XSS in settings page. Props Simon Waters, Surevine Limited.
- Fix to object cache so entries may now be deleted when posts updated. (object cache still experimental)
- Documentation updates and cleanup of settings page.
- Replace legacy mfunc/mnclude/dynamic-cached-content functionality with a "wpsc_cachedata" cacheaction filter.
- Added dynamic-cache-test.php plugin example wpsc_cachedata filter plugin.
- Delete post, tag and category cache when a post changes from draft to publish or vice versa. Props @Biranit.
- Update advanced-cache.php and wp-config.php if wp-cache-phase1.php doesn't load, usually happening after migrating to a new hosting service.
- Misc bugfixes.
- Any mfunc/mclude/dynamic-cached-content tags in comments are now removed.
- Dynamic cached content feature disabled by default and must be enabled on the Advanced Settings page.
- Support for the mobile theme in Jetpack via helper plugin on script's Plugins tab.
- Minor updates to documentation
- Fixed XSS in settings page.
- mfunc tags could be executed in comments. Fixed.
- More support for sites that use the LOGGED_IN_COOKIE constant and custom cookies.
- Garbage collection of old cache files is significantly improved. I added a scheduled job that keeps an eye on things and restarts the job if necessary. Also, if you enable caching from the Easy page garbage collection will be enabled too.
- Editors can delete single cached files from the admin bar now.
- Fixed the cached page counter on the settings page.
- Some sites that updated to 1.0 experienced too much garbage collection. There are still stragglers out there who haven't upgraded but that's fixed now!
- Supercached mobile files are now used as there was a tiny little typo that needed fixing.
- If your site is in a directory and you saw problems updating a page then that should be fixed now.
- The deactivate hook has been changed so your configuration isn.t hosed when you upgrade. Unfortunately this will only happen after you do this upgrade.
- Some sites use custom cookies with the LOGGED_IN_COOKIE constant. Added support for that.
- Added support for WPTouch Pro, but it appears to be flaky still. Anyone have time to work on that? I don.t.
- Some sites had problems with scheduled posts. For some reason the plugin thought the post was in draft mode and then because it only checked the same post once, when the post magically became published the cache wasn.t cleared. That.s fixed, thanks to the debug logging of several patient users.
- And more bug fixes and translation updates.
- Use $_SERVER[ 'SERVER_NAME' ] to create cache directories.
- Only create blogs cached directories if valid requests and blogs exist.
- Only clear current blog's cache files if navigation menu is modified
- Added clean_post_cache action to clear cache on post actions
- Removed garbage collection details on Contents tab
- Added wp_cache_check_mobile cacheaction filter to shortcircuit mobile device check.
- Don't delete cache files for draft posts
- Added action on wp_trash_post to clear the cache when trashed posts are deleted
- Show a warning when 304 browser caching is disabled (because mod_rewrite caching is on)
- New check for safe mode if using less that PHP 5.3.0
- Added wp_supercache_remove_cookies filter to disable anonymous browsing mode.
- Fixed garbage collection schedule dropdown
- Fixed preload problem clearing site's cache on "page on front" sites.
- Fix for PHP variable not defined warnings
- Fixed problem refreshing cache when comments made as siteurl() sometimes didn't work
- Preloading of taxonomies is now optional
- Domain mapping fixes.
- Better support for https sites. Remove https:// to get cache paths.
- Added AddDefaultCharset .htaccess rule back in and added an option to remove it if required.
- Added multisite plugin that adds a "Cached" column to Network->Sites to disable caching on a per site basis.
- Added WPTouch plugin to modify browser and prefix list in mobile detection code. Added support for that plugin's exclude list.
- Fixed cache tester
- Filter the tags that are used to detect end-of-page using the wp_cache_eof_tags filter.
- Removed debug level from logging as it wasn't helpful.
- Removed mention of wp-minify.
- Removed AddDefaultCharset .htaccess rule
- Fixed problem with blogs in a folder and don't have a trailing slash
- New scheduling of garbage collection
- Added a "Delete cache" link to admin bar to delete cache of current page.
- Updated documentation
- Sorry Digg, Stephen Fry power now!
- Updated translations
- Preload taxonomies and all post types except revisionsand nav menu items
- Fixed previews by logged in users.
- Added option to make logged in users anonymous
- Use WP 3.0 variables to detect multisite installs
- Hash filenames so files are served from the same CDNs
- Fixed typo, is_front_page.
- Serve repeated static files from the same CDN hostname.
- Updated translations.
- Make supercache dir lowercase to avoid problems with unicode URLs.
- Add option to skip https loaded static content.
- Remove 5 second check on age of existing cache files. Should help with posts that get lots of comments and traffic.
- Lots of bugs fixed.
- CDN updates: can be switched off, multiple CNAMEs.
- Uninstall process improved. It removes generated files and fixes edited files.
- Cached dynamic pages can now be stored in Supercache files and compressed.
- 1and1 Webhosting fix (/kunden/)
- Remove log by email functionality as it caused problems for users who were inundated by email
- Many more minor fixes and changes.
- Fixed problem serving cached files with PHP
- Added support for 304 "file not modified" header to help browser caching. (PHP caching only)
- Added French & German translations, updated Italian translation and fixed translation strings.
- Sleep 4 seconds between preload urls to reduce load on the server
- Updated docs and FAQs.
- Disable compression on on easy setup page. Still causes problems on some hosts.
- Remove footerlink on easy setup page.
- Don't delete mod_rewrite rules when caching is disabled.
- Don't stop users using settings page when in safe mode.
- Settings page split into tabbed pages.
- Added new "Easy" settings page for new users.
- New PHP caching mode to serve supercached files.
- Mobile support fixes.
- Added Domain mapping support plugin.
- Added "awaiting moderation" plugin that removes that text from posts.
- Terminology change. Changed "half on" to "legacy caching".
- Fixed cache tester on some installs of WordPress.
- Updated documentation
- Added $wp_super_cache_lock_down config variable to hide lockdown and directly cached pages admin items.
- Preloaded checks if it has stalled and reschedules the job to continue.
- Serve the gzipped page when first cached if the client supports compression.
- Lots more bug fixes..
- Fixed division by zero error in half on mode.
- Always show "delete cache" button.
- Fixed "Update mod_rewrite rules" button.
- Minor text changes to admin page.
- Forgot to change version number in wp-cache.php
- Added preloading of static cache.
- Better mobile plugin support
- .htaccess rules can be updated now. Added wpsc_update_htaccess().
- Fixed "page on front" cache clearing bug.
- Check for wordpress_logged_in cookie so test cookie isn't detected.
- Added clear_post_supercache() to clear supercache for a single post.
- Put quotes around rewrite rules in case paths have spaces.
- Added experimental object cache support.
- Added Chinese(Traditional) translation by Pseric.
- Added FAQ on WP-Cache vs Supercache files.
- Use Supercache file if WP-Cache file not found. Useful if mod_rewrite rules are broken or not working.
- Get mobile browser list from WP Mobile Edition if found. Warn user if .htaccess out of date.
- Make sure writer lock is unlocked after writing cache files.
- Added link to developer docs in readme.
- Added Ukranian translation by Vitaly Mylo.
- Added Upgrade Notice section to readme.
- Warn if zlib compression in PHP is enabled.
- Added compression troubleshooting answer. Props Vladimir (http://blog.sjinks.pro/)
- Added Japanese translation by Tai (http://tekapo.com/)
- Updated Italian translation.
- Link to WP Mobile Edition from admin page for mobile support.
- Added Spanish translation by Omi.
- Added Italian translation by Gianni Diurno.
- Addded advanced debug code to check front page for category problem. Enable by setting $wp_super_cache_advanced_debug to 1 in the config file.
- Fixed wordpress vs wordpress_logged_in cookie mismatch in cookie checking function.
- Correctly check if WP_CACHE is set or not. PHP is weird.
- Added wp_cache_clear_cache() to clear out cache directory.
- Only show logged in message when debugging enabled.
- Added troubleshooting point 20. PHP vs Apache user.
- Fixed problem deleting cache file.
- Don't delete cache files when moderated comments are deleted.
- Fixed problem with blogs in folders.
- Added cache file listing and delete links to admin page.
- Added "Newest Cached Pages" listing in sidebox.
- Made admin page translatable.
- Added "How do I make certain parts of the page stay dynamic?" to FAQ.
- Advanced: added "late init" feature so that plugin activates on "init". Set $wp_super_cache_late_init to true in config file to use.
- Disable supercaching when GET parameters present instead of disabling all caching. Disable on POST (as normal) and preview.
- Fixed problem with cron job and mutex filename.
- Warn users they must enable mobile device support if rewrite rules detected. Better detection of when to warn that .htaccess rules must be updated (no need when rewrite rules not present)
- Advanced: Added "wpsupercache_404" filter. Return true to cache 404 error pages.
- Use the wordpress_test_cookie in the cache key.
- Show correct number of cache files when compression off.
- Fixed problem with PHP safe_mode detection.
- Various bugfixes and documentation updates. See Changelog.txt
- Move "not logged in" message init below check for POST.
- Add is_admin() check so plugin definitely can't cache the backend.
- Add "do not cache" page type to admin page.
- Add uninstall.php uninstall script.
- Updated cache/.htaccess rules (option to upgrade that)
- Added FAQ about category and static homepage problem.
- Add wp_cache_user_agent_is_rejected() back to wp-cache-phase2.php
- Show message for logged in users when caching disable for them.
- Check filemtime on correct supercache file
- Show next and last GC times in minutes, not local time.
- Don't serve wp_cache cache files to rejected user agents. Supercache files are still served to them.
- If enabled, mobile support now serves php cached files to mobile clients and static cached files to everyone else.
- Added checks for "WPSC_DISABLE_COMPRESSION" and "WPSC_DISABLE_LOCKING" constants to disable compression and file locking. For hosting companies primarily.
- Added check for DONOTCACHEPAGE constant to avoid caching a page.
- Use PHP_DOCUMENT_ROOT when creating .htaccess if necessary.
- Added "Don't cache for logged in users" option.
- Display file size stats on admin page.
- Clear the cache when profile page is updated.
- Don't cache post previews.
- Added backslashes to rejected URI regex list.
- Fixed problems with posts and comments not refreshing.